Home / Products / Hydraulic motors

Accessories

Accessories for hydraulic motors

Coaxial or angular gear units must be completely filled with oil when installed vertically.

During filling, an air bubble may form in the upper part at the level of the shaft seal, which must be eliminated to prevent insufficient lubrication. Since the oil volume increases as the temperature rises, an expansion tank with oil level control and breather filter must be installed to compensate and prevent harmful excess pressure inside the gear unit.

Motor specifications

Hydraulic motors AE 3 - AE 5

Axial piston motors with constant displacement in swash plate principle

Vg = 2,86 cm³/rev – 5,15 cm³/rev

 

AE 3

AE 4

AE 5

Geometr. Displacement

[cm³/rev]

2,86

4,00

5,15

Theoretic specific torque

[Nm/bar]

0,05

0,06

0,08

Inlet pressure, max.

[bar]

250,00

250,00

250,00

Max, torque

[Nm]

10,25

14,25

18.50

Operating speed range

[rpm]

10-5150

5-3750

3-3000

Intermittent power

[kw]

3,80

3,80

3,80

AE 3 - AE 5

Phone: 86-20-85826654

Hydraulic motors AE 10-AE 21

Axial piston motors with constant displacement in swash plate principle

Vg = 11,4 cm³/rev – 21,3 cm³/rev

 

AE 10

AE 16

AE 21

Geometr. Displacement

[cm³/rev]

11,44

16,01

21,31

Theoretic specific torque

[Nm/bar]

0,18

0,25

0,34

Inlet pressure, max.

[bar]

250,00

250,00

250,00

Max, torque

[Nm]

41,00

 57,30

76,30

Operating speed range

[rpm]

10-3000

5-2500

3-2400

Intermittent power

[kw]

9,20

9,60

12,80

AE 10-AE 21

Phone: 86-20-85826654

Hydraulic motors AE 22-AE 45

Radial piston motors with polygon rings and gap seal in the control system

Vg = 22,5 cm³/rev – 45,0 cm³/rev

 

AE 22

AE 32

AE 40

AE 45

Geometr. Displacement

[cm³/rev]

22,50

31,50

40,50

45,00

Theoretic specific torque

[Nm/bar]

0,36

0,50

0,64

0,72

Inlet pressure, max.

[bar]

250,00

250,00

250,00

250,00

Max, torque

[Nm]

81,00

113,00

145,00

161,00

Operating speed range

[rpm]

10-2000

5-2000

3-2000

10-2000

Intermittent power

[kw]

11,0

15,00

19,00

21,50

AE 22-AE 45

Phone: 86-20-85826654

Hydraulic motors KM 11 - RM 11

In radial piston engines, seven radially arranged pistons act on the crankshaft via a heptagonal ring with needle cage. In the KM 11 engine type, control is by means of translational movement of the control ring and gap seal to the housing. The RM 11 radial piston engine, on the other hand, has a backlash-adjusting control system. This makes the motor less sensitive to the effects of pressure and temperature and reduces leakage.

Vg = 11,1 cm³/rev

 

KM 11

RM 11

Geometr. Displacement

[cm³/rev]

11,13

11,13

Theoretic specific torque

[Nm/bar]

0,18

0,18

Inlet pressure, max.

[bar]

210,00

250,00

Max, torque

[Nm]

31,60

37,70

Operating speed range

[rpm]

10-3000

5-3600

Intermittent power

[kw]

4,30

6,00

KM 11 - RM 11

Phone: 86-20-85826654

Hydraulic motors KM 22 – KM 32

Radial piston motors with polygon rings and gap seal in the control system

Vg = 22,0 cm³/rev – 33,0 cm³/rev

 

KM 22

KM 32

Geometr. Displacement

[cm³/rev]

21,99

32,99

Theoretic specific torque

[Nm/bar]

0,35

0,53

Inlet pressure, max.

[bar]

250,00

250,00

Max, torque

[Nm]

77,90

118,00

Operating speed range

[rpm]

10-2250

10-1500

Intermittent power

[kw]

7,50

7,50

KM 22 – KM 32

Phone: 86-20-85826654

Hydraulic motors KM 45 – KM 63

Radial piston motors with polygon rings and gap seal in the control system

Vg = 44,0 cm³/rev – 66,0 cm³/rev

 

KM 45

KM 63

Geometr. Displacement

[cm³/rev]

43,98

65,97

Theoretic specific torque

[Nm/bar]

0,70

1,05

Inlet pressure, max.

[bar]

250,00

250,00

Max, torque

[Nm]

156,00

236,00

Operating speed range

[rpm]

5-1800

5-1200

Intermittent power

[kw]

11,00

11,00

KM 45 – KM 63

Phone: 86-20-85826654

Hydraulic motors KM 90 - KM 110

Radial piston motors with polygon rings and gap seal in the control system

Vg = 88,4 cm³/rev - 109,5 cm³/rev

 

KM 90

KM 110

Geometr. Displacement

[cm³/rev]

88,40

109,52

Theoretic specific torque

[Nm/bar]

1,41

1,74

Inlet pressure, max.

[bar]

210,00

210,00

Max, torque

[Nm]

266,00

333,00

Operating speed range

[rpm]

5-900

5-750

Intermittent power

[kw]

10,00

10,00

KM 90 - KM 110

Phone: 86-20-85826654

Individual designs of valve assemblies

Versions e.g. with lowering brake valves or complete valve control systems including proportional or servo valves are also available.

For such applications, however, please consult our technical office.

To the contact form

Individual designs of valve assemblies

Versions e.g. with lowering brake valves or complete valve control systems including proportional or servo valves are also available.

For such applications, however, please consult our technical office.

To the contact form

Application areas of valve assemblies

Wagon puller in mining

Our hydraulic motors are used in mining. Underground, rail-bound trolleys are pushed or pulled into or out of freight elevators by hydraulically driven trolley pullers.

With hydraulic motors of the RMX series, Düsterloh Fluidtechnik manufactures particularly robust motors that ensure reliable movement of the trolleys. Precise control of the motors is guaranteed by mounting the valve assemblies directly on our motors.

Home Company News Products Service 
Guangzhou Dusterloh Machinery Co., Ltd.
(The official overseas office of Düsterloh Fluidtechnik GmbH Germany)
Hong Kong Dusterloh Machinery Co. Limited
Tel: +86 20 85826654
Fax: +86 20 85826654
E-mail: tony.ling@gzduesterloh.cn
E-mail: binhua.jiang@gzduesterloh.cn
Add: Room No.B312, 3 Hankee Avenue Dalong Street Panyu District Guangzhou City China
Search · Contact · Imprint · Data privacy
Copyright © 2025 Düsterloh Fluidtechnik GmbH