Guangzhou Dusterloh Machinery Co., Ltd

1. subplates for valve assembly with standardized port patterns without pressure limitation.

Subplates for valve assembly DN6/DN10 according to DIN24340 (ISO 4401 - CETOP - RP121H) and DN8 according to ISO 10372-4.Combinations with integrated brake control are available.
2. subplates for valve assembly with standardized port patterns with pressure relief MHDB16.

Valve assembly with pressure relief and feed > 1.5 bar by 2 pressure feed valves MHDB16K2-2x420VFB (pmax. = 420 bar, Qmax. = 100 l/min). The integrated feed check valves open from 1.5 bar. In order to prevent a feed-out, the feed pressure at port "E" must be higher, or an additional protection by an external check valve at port "E" is recommended. Combinations with variant 1 available.
3. subplates for valve assembly with standardized port patterns with DBDS10 pressure relief.

Valve assembly with pressure relief and supply >0.1 bar by 2 direct operated pressure valves DBDS10K1x/315bar (pmax. = 315 bar, Qmax. = 80l/min). The separate feed check valves open at >0.1 bar. Combinations with variant 1 are also available.
4. sub-bases for valve assembly with standardized port patterns with DDP16 pressure relief.

Valve assembly with pressure relief and supply > 0.1 bar through a pilot operated double pressure valve DDP16ENxxx (pmax. = 480 bar, Qmax. = 400 l/min) or DDP32ENxxx (pmax. = 480 bar, Qmax. = 700 l/min). The valve pressure setting applies to both directions of rotation. The valve with leakage line "L3" always works against the leakage pressure. Combinations with variant 1 are available, on request also with valve bodies > DN10.

Motor specifications

KM 11 - RM 11
KM 22 – KM 32
KM 45 – KM 63
KM 90 - KM 110

Hydraulic motors KM 11 - RM 11

In radial piston engines, seven radially arranged pistons act on the crankshaft via a heptagonal ring with needle cage. In the KM 11 engine type, control is by means of translational movement of the control ring and gap seal to the housing. The RM 11 radial piston engine, on the other hand, has a backlash-adjusting control system. This makes the motor less sensitive to the effects of pressure and temperature and reduces leakage.

Vg = 11,1 cm³/rev

	KM 11	RM 11
Geometr. Displacement [cm³/rev]	11,13	11,13
Theoretic specific torque [Nm/bar]	0,18	0,18
Inlet pressure, max. [bar]	210,00	250,00
Max, torque [Nm]	31,60	37,70
Operating speed range [rpm]	10-3000	5-3600
Intermittent power [kw]	4,30	6,00

KM 11 - RM 11

Phone: 86-20-85826654

Hydraulic motors KM 22 – KM 32

Radial piston motors with polygon rings and gap seal in the control system

Vg = 22,0 cm³/rev – 33,0 cm³/rev

	KM 22	KM 32
Geometr. Displacement [cm³/rev]	21,99	32,99
Theoretic specific torque [Nm/bar]	0,35	0,53
Inlet pressure, max. [bar]	250,00	250,00
Max, torque [Nm]	77,90	118,00
Operating speed range [rpm]	10-2250	10-1500
Intermittent power [kw]	7,50	7,50

KM 22 – KM 32

Phone: 86-20-85826654

Hydraulic motors KM 45 – KM 63

Radial piston motors with polygon rings and gap seal in the control system

Vg = 44,0 cm³/rev – 66,0 cm³/rev

	KM 45	KM 63
Geometr. Displacement [cm³/rev]	43,98	65,97
Theoretic specific torque [Nm/bar]	0,70	1,05
Inlet pressure, max. [bar]	250,00	250,00
Max, torque [Nm]	156,00	236,00
Operating speed range [rpm]	5-1800	5-1200
Intermittent power [kw]	11,00	11,00

KM 45 – KM 63

Phone: 86-20-85826654

Hydraulic motors KM 90 - KM 110

Radial piston motors with polygon rings and gap seal in the control system

Vg = 88,4 cm³/rev - 109,5 cm³/rev

	KM 90	KM 110
Geometr. Displacement [cm³/rev]	88,40	109,52
Theoretic specific torque [Nm/bar]	1,41	1,74
Inlet pressure, max. [bar]	210,00	210,00
Max, torque [Nm]	266,00	333,00
Operating speed range [rpm]	5-900	5-750
Intermittent power [kw]	10,00	10,00

KM 90 - KM 110

Phone: 86-20-85826654

Valve assemblie

Valve assemblies for hydraulic motors

1. subplates for valve assembly with standardized port patterns without pressure limitation.

2. subplates for valve assembly with standardized port patterns with pressure relief MHDB16.

3. subplates for valve assembly with standardized port patterns with DBDS10 pressure relief.

4. sub-bases for valve assembly with standardized port patterns with DDP16 pressure relief.

Motor specifications

Hydraulic motors KM 11 - RM 11

Hydraulic motors KM 22 – KM 32

Hydraulic motors KM 45 – KM 63

Hydraulic motors KM 90 - KM 110

Individual designs of valve assemblies

Individual designs of valve assemblies

Application areas of valve assemblies

Wagon puller in mining